The EASYGUM™ Waterproofing Membrane System from Jaydex has been appraised for use as:
A) A tanking membrane for use on basement walls below grade that are protected from damage by the use of a Jaydex approved protection system;
B) A waterproofing membrane for use on external roofs with a minimum fall of 1.5° (1:40) towards an outlet;
The EASYGUM™ Waterproofing Membrane System is suited for use on concrete basement walls below grade provided the applied membrane is protected from mechanical damage from soil and the like. Only Jaydex approved protection should be utilized.
The FFR-K1 One Part Kevlar, Single Pot, Liquid Applied Membrane system, (FFR-K1) is a liquid applied, moisture cured, one-pot waterproofing system with an optional integral reinforcement layer to be used on flat roofs and vertical walls. It is designed for the seamless water-proofing and long term protection of roof and wall surfaces from harsh envi-ronments. The product can be applied by brush, roller or spray* to the substrates specified in the appraisal.
The system consists of substrate preparation products, the FFR-K1 coating, FFR-K1 Reinforcing Scrim available in both tape and sheet form and FFR-K1 Sealant.
FFR-K1 is suited for application to new substrates and over the following existing substrates: bare or coated concrete slabs, Coloursteel roofing, Galvanised iron roofing, Zincalume roofing, bare treated timber ply, Asphalt roofing substrates, Bituminous Felt substrates, Butyl Rubber substrates older than 5 years, and EPDM substrates older than 5 years, that have been shown to comply with all requirements described in the FFR-K1 Technical Manual and in particular the inspection and testing requirements.